21700 5.5Ah 3C Lithium-Ion Cell – Wholesale & In Stock

The SWY 21700 5.5Ah 3C is a high-rate cylindrical lithium-ion cell delivering 5,500mAh nominal capacity at 3.6V, 16.5A continuous discharge (30A with 75°C cut-off), and 60A 2-second pulse. Becell offers large ready stock and competitive wholesale pricing — contact us for a quotation.

Category: Brand:

21700 5.5Ah 3C Lithium-Ion Cell — High-Rate Power, Wholesale Pricing & Ready Stock

HUIZHOU BECELL TECHNOLOGY CO LTD supplies the SWY 21700 5.5Ah 3C cylindrical lithium-ion cell — a 21.25mm × 70.55mm, 66g high-rate cell built for power tools, e-mobility, drones, robotics, and high-drain battery packs. Bulk stock is available now at competitive wholesale pricing. Send your required quantity  through the inquiry button below for a same-business-day quotation.

Supply snapshot: 5,500mAh nominal capacity · 3.6V nominal voltage · 16.5A continuous discharge without temperature cut · 30A continuous with 75°C temperature cut · 60A 2-second pulse · 500+ cycles at 2.75A charge / 5.5A discharge · Large inventory, ready for wholesale orders.


Built for High-Rate Discharge Applications

The 21700 5.5Ah 3C fills the gap between energy-dense 21700 cells and ultra-high-rate specialist cells. Its 16.5A continuous discharge without a temperature cut supports continuous high-load operation, while a 30A continuous rating is available with a 75°C surface temperature cut-off for applications where thermal management is designed in. A 60A, 2-second pulse rating covers surge loads such as motor startup, power-tool trigger pulls, and drone takeoff bursts.

Typical application fit includes cordless power tools, e-bikes and e-scooters, drones and UAV battery packs, robotics, portable power stations, and high-current 21700 pack builds where 5.5Ah capacity and 3C-class discharge are both required.


Full Specifications

Parameter Rating
Model SWY 21700 5.5Ah
Cell format Cylindrical, 21700
Nominal capacity 5,500mAh (1.1A CC to 2.5V)
Minimum capacity 5,400mAh (1.1A CC to 2.5V)
Nominal voltage 3.6V
AC impedance 12 ± 2mΩ (1kHz)
Charge cut-off voltage 4.20 ± 0.05V
Discharge cut-off voltage 2.5V
Standard charge 2.75A CC/CV to 4.20V, 0.11A cut-off
Rapid charge 5.5A
Standard discharge 2.75A
Max continuous discharge 16.5A without temperature cut · 30A with 75°C cut
Max instantaneous discharge 60A (2-second pulse)
Weight 66.0 ± 2.0g
Dimensions φ21.25 ± 0.15mm × H70.55 ± 0.2mm
Operating temperature — charge 0–10°C at 1.1A; 10–45°C at 2.75A
Operating temperature — discharge -20°C to 60°C
21700-5500mah-high-rate-cell
SWY 21700 5.5Ah 3C lithium-ion cell

Discharge Performance and Cycle Life

At 25±2°C, capacity retention against the 1.1A baseline is specified at ≥96% at 2.75A, ≥95% at 5.5A, and ≥95% at 16.5A. In practical terms, the cell does not collapse under 3C load — it holds usable capacity at the current levels most power-tool and light-EV packs actually draw.

Cycle life is rated under two separate regimes:

  • 2.75A charge / 5.5A discharge: ≥500 cycles to 80% of initial capacity.

  • 5.5A charge / 16.5A discharge: ≥300 cycles to 60% of initial capacity.

Both figures are tied to defined current, voltage window, rest periods, and end-of-life criteria, so buyers can compare them directly against their own duty cycle rather than relying on a headline cycle number without conditions.

Low-temperature behaviour is also specified: ≥75% capacity retention at -20°C and ≥99% at 55°C, referenced to the 25°C baseline. Charge retention after 28 days at 25±2°C requires a 2.75A discharge time of ≥108 minutes.


Safety and Compliance-Ready Testing

The cell platform is validated against the following safety and mechanical test regimes. Where your project requires formal certificates such as UN38.3 test summaries, IEC 62133-2, or transport documentation, request the current document set with your quotation — we confirm certificate holder, model coverage, and validity before sharing.

  • External short circuit — 80±20mΩ, no fire, no explosion.

  • Overcharge — 5.5A to 10V, 7 hours or until temperature returns to ambient, no fire, no explosion.

  • Heating — 5±2°C/min to 130±2°C, 10-minute hold, no fire, no explosion.

  • NaCl immersion — 3.5% NaCl solution, 2 hours, no fire, no explosion.

  • Low-pressure simulation — 11.6kPa for 6 hours, no fire, no explosion, no leakage.

  • Thermal cycling — 72±2°C / -40±2°C, 10 cycles, OCV ≥90% of initial.

  • Vibration — 7–200Hz logarithmic sweep, 3 hours per axis, OCV ≥90% of initial.

  • Free fall — 1.0m, three drops, random orientation, no fire, no explosion.


Wholesale Stock, Competitive Pricing, Fast Quotation

Becell holds large ready stock of the 21700 5.5Ah 3C and quotes bulk orders at competitive wholesale pricing — pricing is confirmed against quantity, destination, and whether you require matched cells or pack-ready sorting. Cells ship at ≤50% SOC (≤3.90V) as standard for transport safety, with packaging at 81 cells per box / 324 cells per case.

If you are evaluating this cell for a new pack design, a replacement BOM, or a recurring wholesale program, send the following and we will respond with price, lead time, and documentation:

  1. Target quantity — sample, pilot batch, or recurring volume.

  2. Application — power tool, e-mobility, drone, robotics, or other.

  3. Discharge profile — continuous current and pulse current you need.

  4. Documentation needs — UN38.3, IEC 62133-2, MSDS, or specification confirmation.

→ [Contact Becell for Wholesale Pricing & Stock Availability]

HUIZHOU BECELL TECHNOLOGY CO LTD — Cylindrical lithium-ion cell supply, wholesale and OEM support.

Reviews

There are no reviews yet.

Be the first to review “21700 5.5Ah 3C Lithium-Ion Cell – Wholesale & In Stock”

Your email address will not be published. Required fields are marked *

Scroll to Top