Power That Fits Your Build, Not the Other Way Around

Most FPV battery listings give you a fixed set of specs and ask you to design around them. Becell does the opposite. Tell us your continuous and burst current draw, the maximum dimensions your frame can accept, and the weight budget you are trying to hit — we engineer the pack to those constraints.
Based in Huizhou, China, Becell manufactures high-discharge LiPo and LiHV battery packs for FPV racing, freestyle, cinelifter, and long-range platforms. Our standard range already covers 500mAh to 22,000mAh across 2S to 8S, with C-rates up to 180C. When your project falls outside that matrix, our OEM/ODM team builds the bridge.
What You Can Specify
⚡ Discharge Current & C-Rate
FPV flight performance is limited by voltage sag under throttle. Whether you need a lightweight 100C pack for a 5-inch racer or a 50C–120C long-range pack for a 10-inch cinelifter, we match the cell chemistry and tab design to your amp draw. Burst and continuous ratings are verified at pack level — not just on a single cell datasheet.
📐 Dimensions
Our规格书 already lists multiple footprints for the same capacity — for example, 6S 4000 is available in both 141×44×42mm and 51×44×141mm. That flexibility exists because frame geometry varies more than capacity alone suggests. Send us your internal bay dimensions and connector orientation; we confirm whether an existing tooling set fits or a custom layout is required.
⚖️ Weight
Weight reduction in FPV is rarely linear — it comes from cell selection, tab thickness, wrapping, and connector choice. Our packs range from 37g (2S 650) to 3221g (8S 22000). If you are targeting a specific all-up weight, tell us the number. We will propose the cell format and structural approach that gets closest without sacrificing burst delivery.
🔋 Voltage Platform
Beyond standard LiPo (3.7V nominal/cell), we manufacture LiHV high-voltage packs at 3.8V nominal/cell. A 6S LiHV pack delivers approximately 22.8V nominal and up to 26.1V fully charged, while 8S LiHV reaches 30.4V nominal — giving you more headroom for high-kV motor setups and long-range efficiency.

Standard FPV Battery Range (Highlights)
| Capacity | Configurations | C-Rate Range | Weight Range |
|---|---|---|---|
| 500–850mAh | 6S | 60C/130C – 100C | 100g – 148g |
| 1050–1550mAh | 4S / 6S | 100C – 180C | 126g – 272g |
| 2200–4000mAh | 4S / 6S | 35C/70C – 120C | 240g – 590g |
| 5000–8000mAh | 6S / 8S | 25C/40C – 70C-180C | 753g – 1702g |
| 9500–10000mAh | 6S / 8S | 25C/40C – 70C-180C | 1250g – 1699g |
| 4500–22000mAh (LiHV) | 6S / 8S | 20C/35C – 50C-120C | 530g – 3221g |
Full specification matrix available on request. Connectors including XT30, XT60, XT90, and AS150 can be fitted to order.
From Requirement to Sample: How Custom Development Works
- Share your constraints — current draw (continuous/burst), max dimensions, target weight, cell count, voltage platform, connector type.
- Engineering review — our team checks feasibility against existing cell matrices and tooling, and flags trade-offs before quoting.
- Sample & validation — a pre-production sample is built to your spec for bench and flight testing.
- Production & repeatability — once validated, the pack enters controlled production with consistent cell sourcing and pack-level QC.
We do not publish a one-size-fits-all MOQ because the right threshold depends on cell format and structural complexity. Tell us your project volume, and we will give you a straight answer on tooling and minimums.
Built for Builders Who Cannot Afford Voltage Sag
FPV pilots judge a battery in the first three throttle punches. A pack that looks good on paper but sags under load costs races, footage, and airframes. Becell’s engineering approach starts from discharge behavior under real load, not from a nominal capacity number. Whether you are equipping a 2S whoop for indoor proximity or an 8S 22,000mAh platform for long-endurance cinema, the goal is the same: stable voltage where it matters.
Talk to a Battery Engineer
HUIZHOU BECELL TECHNOLOGY CO LTD
📞 +86-15360987918
✉️ INFO@BECELLBATTERY.COM
Send us your current draw, dimensions, and weight target in the first message. You will get an engineering response, not a generic catalog reply.
