UAV Battery Cells: High-Rate, Semi-Solid-State, and Anode-Free Platforms
Huizhou Becell Technology Co., Ltd. manufactures lithium cells and battery packs for unmanned aerial vehicles. Our portfolio covers three architectures — high-rate laminated cells, semi-solid-state wound cells, and anode-free high-density cells — and each one ships as a bare cell or a complete pack with BMS, connector, and enclosure.

Three Platforms, Three Power Priorities
UAV missions rarely optimize for one variable. For example, a heavy-lift logistics drone needs energy per kilogram, whereas an FPV airframe needs instantaneous current. Meanwhile, a long-endurance ISR platform needs both within a fixed bay. Therefore, we build three platforms instead of forcing one chemistry to serve every mission.
| Platform | Capacity Range | Energy Density | Max Continuous Discharge |
|---|---|---|---|
| High-Rate Laminated | 350–24,000 mAh | ~140–228 Wh/kg | 10C–100C |
| Semi-Solid-State Wound | 7,000–67,000 mAh | 305–400 Wh/kg | 3C–20C |
| Anode-Free High-Density | 17,000–65,000 mAh | 451–550 Wh/kg | Rate by project |
High-Rate Laminated Cells (10C–100C)
Laminated pouch construction delivers low internal resistance for burst power and fast throttle response. Specifically, selected models reach 100C continuous discharge in the 1,000–1,450 mAh range. Moreover, the broader line spans 25C–60C for industrial multirotors. As a result, designers match C-rate to actual mission current instead of over-specifying rate and carrying extra mass.
Best fit: FPV racing, cinematic freefly, interceptor UAVs, and eVTOL burst-power demands.

Semi-Solid-State Cells (305–400 Wh/kg)
Semi-solid-state chemistry in a wound format balances energy density with usable continuous discharge. In addition, the platform reaches 400 Wh/kg at 30,000 mAh and 40,000 mAh, while the 20C/30C model (8570117) covers airframes that need both energy and throttle response.
Best fit: long-endurance mapping, inspection, cargo and heavy-lift UAVs.

Anode-Free Cells (451–550 Wh/kg)
Anode-free architecture removes the graphite host and deposits lithium directly on copper during first charge. Consequently, cell-level energy density reaches 550 Wh/kg, and we tune it between 440–550 Wh/kg depending on cycle-life targets. However, these cells trade high-rate capability for maximum gravimetric energy.
Best fit: maximum-endurance ISR, high-altitude long-endurance platforms, and weight-critical cargo drones.
Custom Cell and Pack Development
The specifications above are starting points, not fixed limits. Therefore, we engineer cells and packs against three inputs:
- Electrical: continuous and peak current, charge rate, voltage window, mission profile.
- Mechanical: thickness, width, length, tab orientation, and enclosure constraints.
- Mass: weight targets at cell and pack level, including BMS, wiring, connector, and enclosure.
In addition, chemistry coverage spans lithium-ion, semi-solid-state, solid-state, and anode-free architectures. Finally, customers choose between cell-only supply and complete-pack supply. Recent pack work includes a 24S 88.8V, 40Ah semi-solid-state pack at 320 Wh/kg, 11 kg, supporting 3C continuous / 5C peak.
[Start a Custom Development Project →]
Frequently Asked Questions
What is the highest discharge rate available?
Selected high-rate laminated models reach 100C continuous discharge. Moreover, the platform spans 10C to 100C, so airframes can match actual current demand.
What is the highest energy density?
Anode-free models reach 550 Wh/kg, tunable across 440–550 Wh/kg depending on cycle life.
Can you build a custom pack?
Yes. We configure series/parallel layout, capacity, discharge rate, dimensions, weight, connector type, and BMS integration around your requirements.
Cell-only or complete pack?
Both. We supply bare pouches for in-house pack engineering, and complete packs with BMS, wiring, connectors, and enclosure.
Build the UAV Battery Around Your Mission
Send your current profile, bay dimensions, and target weight. Becell will map the requirement to the right platform and return a cell or pack specification for review.
[Send Your UAV Battery Requirements →]
Huizhou Becell Technology Co., Ltd. — lithium-ion, semi-solid-state, solid-state, and anode-free cell and pack manufacturing for UAV platforms.
