SWY 21700 5.5Ah 3C Lithium Battery: A High-Power Cell Available Through BECELL
HUIZHOU BECELL TECHNOLOGY CO LTD now supplies the SWY 21700 5.5Ah cylindrical lithium-ion cell, manufactured by Zhejiang Shineway Technology Co., Ltd. The cell combines 5500mAh nominal capacity with 3C-class continuous discharge, making it relevant to power tools, light electric vehicles, energy storage, and other B2B applications where runtime and current capability both matter.
For procurement and engineering teams: [Request the specification and sample evaluation through BECELL ]
SWY 21700 5.5Ah 3C key specifications
| Parameter | Specification |
|---|---|
| Nominal capacity | 5500mAh (1.1A to 2.5V); minimum 5400mAh |
| Nominal voltage | 3.6V |
| AC impedance (1kHz) | 12±2mΩ |
| Charge cut-off voltage | 4.20±0.05V |
| Discharge cut-off voltage | 2.5V |
| Standard charge / discharge | 2.75A / 2.75A |
| Fast charge | 5.5A |
| Max continuous discharge | 16.5A (without temperature cut); 30A (with 75°C temperature cut) |
| Max instantaneous discharge | 60A (2s pulse) |
| Cycle life | ≥500 cycles to 80% (5.5A discharge); ≥300 cycles to 60% (16.5A discharge) |
| Operating discharge temperature | -20°C to 60°C |
| Weight / dimensions | 66.0±2.0g; φ21.25±0.15mm × 70.55±0.2mm |

Why the 5.5Ah / 3C combination matters. At 5.5Ah, a 10-cell series pack carries roughly 198Wh nominal — enough to extend runtime in cordless tools, e-mobility packs, and backup storage without adding parallel strings. At 16.5A continuous (3C), the cell supports the surge currents those applications demand during start-up, load spikes, and fast-charge windows. The 30A mode with 75°C cut gives system designers headroom for higher-power duty cycles, provided the BMS or protection circuit implements the temperature cut as specified.
Fast charge and high-rate cycling
The cell accepts 5.5A rapid charge (1C) in the 10°C–45°C ambient window, alongside a standard 2.75A charge profile. Two cycle-life regimes are documented in the specification:
- 2.75A charge / 5.5A discharge: ≥500 cycles to 80% of initial capacity.
- 5.5A charge / 16.5A discharge: ≥300 cycles to 60% of initial capacity.
For B2B buyers, the second regime is the more revealing number: it reflects continuous high-rate cycling, not a gentle lab profile. Applications that combine fast charge with high discharge — professional power tools, AGV/AMR packs, light EV — can use the 300-cycle regime as a conservative baseline for warranty and pack-sizing decisions.
Applications: where a 21700 5.5Ah 3C cell fits
21700 cylindrical cells are already established across power tools, cleaning appliances, two-wheel mobility, energy storage, and drones. High-capacity 5.5Ah platforms are positioned as the next step for runtime-sensitive designs. The SWY 21700 5.5Ah is relevant to:
- Power tools and garden equipment: high continuous current for saws, grinders, and blowers; 5.5Ah capacity reduces cell count per pack.
- Light electric vehicles and e-mobility: 3C discharge supports acceleration and hill-start loads; 1C fast charge shortens downtime.
- Energy storage and backup systems: 5.5Ah per cell lowers parallel count; the 500-cycle regime supports daily cycling.
- Cleaning appliances and drones: capacity-to-weight balance for runtime-driven platforms.
Safety and mechanical validation
The manufacturer’s specification covers external short-circuit, overcharge, heating, NaCl immersion, low-pressure simulation, temperature cycling, vibration, and free fall. Acceptance criteria require no fire or explosion across the safety suite; temperature cycling and vibration additionally require open-circuit voltage retention ≥90% of the pre-test value.
These are cell-level validation criteria. Pack designers should still validate the final enclosure, BMS, and thermal path as a system. BECELL can coordinate the relevant specification documents with the manufacturer during evaluation.
Storage, transport, and handling
- Transport SOC: ≤50% (≤3.90V).
- Long-term storage (>3 months): 3.60V–3.90V, dry and low-temperature conditions. High-voltage storage accelerates capacity fade.
- Packaging: 81 cells per box, 4 boxes per carton (324 cells).
FAQ: SWY 21700 5.5Ah 3C lithium battery
Q: What is the continuous discharge current of the SWY 21700 5.5Ah cell?
A: 16.5A without temperature cut, and 30A when the system implements a 75°C surface temperature cut.
Q: Does the cell support fast charging?
A: Yes — 5.5A rapid charge, within the 10°C–45°C ambient charging window.
Q: What cycle life can I expect?
A: ≥500 cycles to 80% capacity under 2.75A charge / 5.5A discharge; ≥300 cycles to 60% under 5.5A charge / 16.5A discharge.
Source the SWY 21700 5.5Ah 3C cell through BECELL
HUIZHOU BECELL TECHNOLOGY CO LTD supplies cylindrical lithium-ion cells for B2B pack builders and OEMs. If your next pack needs a 21700 platform that pairs 5.5Ah capacity with 3C-class discharge and 1C fast charge, send your requirements to BECELL for specification review.
What to include in your inquiry: pack configuration (S/P), continuous and peak current, charge profile, operating temperature range.
[Contact BECELL →] | [Request the SWY 21700 5.5Ah specification ]
